Metrics
Elevation
Figure: Data using an Elevation filter
Uses: Excavations
Volume
Terms in heavy construction and earthmoving used to indicate whether soil is to be removed or added, respectively. Get a Work Remaining (cut/fill) map relative to the available elevation data and any imported designs.
Note: There is no separate Work Remaining metric in WorksOS. Instead, see Work Remaining for volumes.
Figure: Data using an Cut/fill map
A map with shading and/or a grid of measurements at an interval showing the elevation differences between two surfaces, such as an original ground surface and a design surface. Cut/fill maps are color-coded to indicate where earth needs to be cut (on page ) or filled (on page ). See Compare Surfaces and Calculate Volumes.
Uses: Excavation and Grading type projects
Pass count
A measurement of the number of times that a machine (e.g., roller compactor) has traveled over an area on a surface.
Figure: Data using an Pass count filter
Uses: Compaction
Compacted meter value (CMV)
A measurement of the relative stiffness of compacted material as measured by a sensor on a compactor.
Figure: Data using an CMV filter
Uses: Compaction
Machine drive power (MDP)
Machine drive power values recorded by compaction machine systems.
Figure: Data using an MDP filter
Uses: Compaction
Speed
Figure: Data using a Speed filter
Uses: Compaction
Temperature
Figure: Data using a Temperature filter
Uses: Compaction
Work Completed
Volume – Work Completed
Figure: Data using a Work Completed filter
Volume – Work Remaining
Figure: Data using a Work Remaining filter
Next topic: Understand Cut/Fill Colors